show i-sid mac-address-entry

Display all C-MACs learnt on T-UNI ports for a given I-SID.

Syntax

Command Parameters

<1-16777215>
Specifies a service instance identifier (I-SID).
home
Filters the command output to show only MAC addresses learned in the home area.
mac <0x00:0x00:0x00:0x00:0x00:0x00>
Specifies a MAC address.
non-local
Filters the command output to show only MAC addresses learned from other nodes; not local nodes.
port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies the slot and port in one of the following formats:

  • a single slot and port (slot/port)

  • a range of slots and ports (slot/port-slot/port)

  • a series of slots and ports (slot/port,slot/port,slot/port)

  • all ports on the same slot (slot/all)

  • all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

remote
Filters the command output to show only MAC addresses learned in the remote area.

Default

None

Command Mode

User EXEC

Command Output

The show i-sid mac-address-entry command displays the following information:

Output field

Description

I-SID

Specifies the service interface identifier (I-SID).

STATUS

Specifies the learning status of the associated MAC.

MAC-ADDRESS

Specifies the MAC address of the port assigned to the specific I-SID or MAC learned on the specific I-SID.

INTERFACE

Specifies the port or MLT on which the MAC is learned for the specific I-SID.

TYPE

Specifies if the MAC address is learned locally or on an network-to-network interface (NNI) port from a remote destination.

DEST-MAC

Specifies the virtual BMAC address or system ID, in MAC format, of the destination node.

BVLAN

Specifies the B-VLAN on which the destination node is discovered for the I-SID.

DEST-SYSNAME

Specifies the destination system name.

AREA-ROLE

Indicates the area role of the system.

AREA-NAME

Indicates the area name of the system.
9039033-00 Rev AA